DOI : 10.17577/IJERTCONV11IS05024

Download Full-Text PDF Cite this Publication

Text Only Version


MuralidharS1, HarshaCM2 ,BalrajU3,KiranG4 , SwamyM5

JIT, Davangere, karnataka, India

Abstract:The largest issue right now is how to conceptualize energy conservation. Alternative energy sources must be created and used to halt the negative impacts of pollution and global warming. Gravity is the name given to the force that is always at work on earth.

We created a device as a result that uses gravity as a source to create electrical energy. The system is designed so that the body's kinetic energy converts gravitational force into electrical energy. Keywords: pollution, kinetic energy, renewable energy, and gravitational force.

  1. Introduction:

    Today's rapid industrialization and urbanization are increasing demand for energy on a continuous basis. Even though it contributes to pollution and global warming, it serves the need for energy. In a few years, we will run out of water, wood, and coal. At a particular period, in place of sources like solar, wind, biomass, etc. As a result, we need extra energy sources to suit our needs. Because of this, we present a state-of-the-art method for generating power utilizing the continuous gravity of the earth, which permeates the entire world. In actuality, though, the design was unable to materialize as a body. It didn't function as they had anticipated, at least not in theory. preventing gravitational energy from reaching an Deign of the dead weight gravity power generation is shown in the below figure.

    BasicStructure of Power Transmission Chain


    1. MAJOR PARTS:Wheel, Frame, Roller, Bush, Chain, Flywheel, Sprocket, Free Wheel, Bearing, Sprocket, Flywheel, Spurger, Generator.





      • ThicknessofBearing(B) =12mm

      • InnerDiameteroftheBearing(d)=15mm

      • r =Cornerradiionshaftandhousing

      • r = 1(Fromdesigndatabook)

      • MaximumSpeed =14,000rpm (Fromdesigndatabook)

      • MeanDiameter(dm) = (D +d) /2

        = (35+15)/2

      • dm = 25mm


        Ks = 4C1 4C4

        + 0.65


        = (4X 2.3)-1+ 0.65

        • Ks =

        • (1)GEAR-2

          (4 X 2.3)-4





  • BearingNo.6202

  • OuterDiameterofBearing(D)=35 mm

  • Numberofteeth=32 1 Nos.

  • Overalldiameter=60x 1


  • Pitchdiameter=50x Module



  • Depth = (Addendum+Dedendum)xModule



  • PressureAngle =14½°

    (2)GEAR-3 141

  • Numberofteeth =1801Nos.

  • Overalldiameter=180xModule



  • Pitchdiameter =172xmodule



  • Depth =2.157xModule



  • PressureAngle =14½°

  • Themassofabody= 60Kg(Approximately)

  • Here,

  • Force = WeightoftheBody

    = 60Kgx9.81

    = 588.6N

  • Time and Reduction Ratio Results For 2000mmCADD



  1. The choice of the gravity power producing technique is the most fundamental need for power generation.

  2. Create electricity by using gravity to transform potential energy into kinetic energy.

  3. To use gravity power generation to produce up to 60 watts of power.

  4. When feasible, steer clear of simplistic structures.

  5. A higher conversion ratio is required. F. A prolonged energy conversion requires some beginning energy.


We can say that harnessing gravity to generate power is a viable option because we were able to finish the project using a mechanical model. This industry can continue to develop to become more efficient and inventive. At this time, it is anticipated that in the future, renewable energy sources will be able to meet all of the world's energy needs. Solar, wind, tidal, and geothermal energy are a few well-known examples of sustainable energy sources. These sources have certain geographical and other constraints, though, so they are not available to everyone. On the other hand, gravity exists everywhere on our world. As a result, we are able to produce power on a massive scale, such as using gravity, anytime, anyplace. Kerosene lamps should be replaced with products devoid of any fuel to cut down on greenhouse gas emissions.


[5] In January 2013, Victor Rene AnguloValpreda and Mayra Palomares Coral filed US 8344537 B2 App No. 12/668,757.

[6] Mr. Roushan Prabhakar, Mr. Rakesh S. Ambade, Mr. An analysis of gravity power production 2014's volume 3, number 4, of the International Journal of Innovative Research in Science, Engineering, and Technology, pages 11085

[7] For more information on market overview and renewable energy alternatives, see (Accessed on September 25, 2015).

[8] The Gravitational Potential Energy presentation can be viewed here: potential-energy(Accessed on September 25, 2015).

[9] More information about synchronous motor drivers can be found at motor-drivers. (Accessed on September 25, 2015).

[10] More information on LED lighting can be found at (Accessed on September 25, 2015).

[1] Gravity power generation was discussed by Vidhan Srivastava, Sumit Chaudhary, Shailesh M. Pandey, and Kulvinder Rana in the September 2012 issue of the International Journal of Engineering Sciences (IJMRS).

[2] George O. Schur, "Gravity actuated Thermal Motor", US Patent 4121420.

[3] "Lecture on Physics" by Robert B.Leighton, Matthew Sands,and Narosa Book Distributors, volume 1.

[4] "Gravity Power Generation Mechanism" by Chun- chao Wang and Yuh-suiang Wang. 20090115195 A1 App No. 11/935,228 is the U.S. patent number.