Analysis of Support Settlement of G+5 Building ( Conventional and Flat Plate) Subjected to a Lateral Load

DOI : 10.17577/IJERTV4IS060273

Download Full-Text PDF Cite this Publication

Text Only Version

Analysis of Support Settlement of G+5 Building ( Conventional and Flat Plate) Subjected to a Lateral Load

G K Shankarlinge Gowda

Professor,

Department of Civil Engineering, BGSIT, Bellur cross, Karnataka

Praveen D Y

M tech student, BGSIT, Bellur cross, Karnataka

Abstract In this paper, the analysis of G+5 commercial building has been analyzed. The building is subjected to an earthquake loading. G+5 models has been modelled using the software ETAB

13.1.2 for a conventional building and building with flat plate and settlement is provided to the columns of the building and it has been analyzed, the results of axial load has been taken and Axial load is then compared for the conventional building and building with flat plate for both no settlement on column and for the settlement of column.

Keywords Axial load, Conventional building, earthquake, flat plate.

INTRODUCTION

, the slab is that in which slab is directly

Conventional structure includes the columns, beams and slab but in case of flat plate

supported on columns without column capital, drop panel or beams.

The settlement is nothing but, during the construction the load from the super structure as well as the sub structures are transferred into underlying soil profile as a result of this stress increases with in the soil mass and the structure undergoes a time dependent vertical settlement.

Figure 1.1 Conventional frame building

Figure 1.2 Building with flat plate

MODELING AND ANALYSIS

The modelling of both G+6 conventional building and building with flat plate has been done using the ETAB13.1.2. For the earthquake analysis, the input values have been taken for the zone 5 from the IS 1893-2002. Analysis also been done for the response spectrum case.

  1. Building details

    From the below table 1.1 and 1.2 gives the details of the building for both conventional and building with flat plate has been tabulated.

    Table 1.1 Details of conventional building

    Conventional building

    Building

    G+5

    Total height of building

    24m

    Height of each story

    3m

    Column size

    300x650mm

    Beam size

    300x450mm

    Slab thickness

    150mm

    Grade of concrete

    M30

    Grade of steel

    550

    Building with flat plate

    Building

    G+5

    Total height of building

    24m

    Height of each story

    3m

    Column size

    300x650mm

    Slab thickness

    150mm

    Grade of concrete

    M30

    Grade of steel

    550

    Table 1.2 Details building with flat plate

  2. Loading details for both conventional and building with flat plate

    The loading details for these buildings have been taken from the IS 875 part 2 and are tabulated in the below table 1.3

    C Results

    Table 1.3 Loading details

    Dead load

    Program calculated

    Live load

    2kN

    Floor finish

    1.5kN

    Figure 1.3 3D view of G+5 conventional building

    Figure 1.4 3D view of G+5 building with flat plate

    Figure 1.5 Plan of the building for zero settlement

    From the above figure 1.5 shows the plan and location of the column for zero settlement of columns.

    Figure 1.6 Plan of the building for 5mm settlement

    From the figure 1.6, the settlement of 5mm is provided to the columns from C1 to C18 and rest of the columns have zero settlement.

    Table 1.4 Axial loads for 0 settlement and 5mm settlement for conventional building

    Column

    no

    Conventional

    building with 0 settlement

    Conventional

    building with

    5mm settlement

    C1

    426.53

    408.93

    C2

    719.46

    699.06

    C3

    703.85

    683.59

    C4

    703.85

    683.59

    C5

    719.46

    699.06

    C6

    426.53

    408.93

    C7

    678.27

    673.17

    C8

    1193.06

    1184.56

    C9

    1168.25

    1159.78

    C10

    1168.25

    1159.78

    C11

    1193.06

    1184.56

    C12

    678.27

    673.17

    C13

    678.49

    787.54

    C14

    1197.05

    1330.73

    C15

    1170.65

    1303.45

    C16

    1170.65

    1303.45

    C17

    1197.05

    1330.73

    C18

    678.49

    787.54

    C19

    678.49

    569.44

    C20

    1197.05

    1063.36

    C21

    1170.65

    1037.85

    C22

    1170.65

    1037.85

    C23

    1197.05

    1063.36

    C24

    678.49

    569.44

    C25

    678.27

    683.37

    C26

    1193.06

    1201.57

    C27

    1168.25

    1176.73

    C28

    1168.25

    1176.73

    C29

    1193.06

    1201.57

    C30

    678.27

    683.37

    C31

    426.53

    444.13

    C32

    719.46

    739.87

    C33

    703.85

    724.12

    C34

    703.85

    724.12

    C35

    719.46

    739.87

    C36

    426.53

    444.13

    Table 1.5 Axial loads for 0 settlement and 5mm settlement for building with flat plate

    Column

    no

    Building with

    flat plate with 0 settlement

    Building with

    flat plate with

    5mm settlement

    C1

    282.10

    281.36

    C2

    505.27

    503.34

    C3

    481.98

    480.20

    C4

    481.98

    480.20

    C5

    505.27

    503.34

    C6

    282.10

    281.36

    C7

    501.07

    495.18

    C8

    1012.20

    999.69

    C9

    963.84

    951.38

    C10

    963.84

    951.38

    C11

    1012.20

    999.69

    C12

    501.07

    495.18

    C13

    479.56

    502.57

    C14

    968.16

    1019.88

    C15

    919.48

    969.98

    C16

    919.48

    969.98

    C17

    968.16

    1019.88

    C18

    479.56

    502.57

    C19

    479.56

    456.55

    C20

    968.16

    916.43

    C21

    919.48

    868.97

    C22

    919.48

    868.97

    C23

    968.16

    916.43

    C24

    479.56

    456.55

    C25

    501.07

    506.95

    C26

    1012.2

    1024.72

    C27

    963.84

    976.29

    C28

    963.84

    976.29

    C29

    1012.20

    1024.72

    C30

    501.07

    506.95

    C31

    282.10

    282.85

    C32

    505.27

    507.19

    C33

    481.98

    483.77

    C34

    481.98

    483.77

    C35

    505.27

    507.19

    C36

    282.10

    282.85

    From the table 1.4 it has been observed that the axial load for the conventional G+5 building is gradually increases at a rate of 100kN the column C13 to C18

    From the table 1.5 it has been observed that the axial load increases at the rate of 50kN from the column C13 to C18, and it has been noted that from the table 1.4 and table 1.5 the axial load is more as compare to the building with flat plate. Due to settlement the axial load is increased gradually on the columns.

    REFERENCES

    1. Navyashree K, Sahana T S 2012. Use of flat slabs in multi story commercial building situated in high seismic zone.IJRET

    2. S S Patil, Rupali A Sigi 2014. Flat slab construction in India. IJEIT

    3. Prof K S Sable, Er. V A Ghodechor, Prof S B Kandekar 2012. Comparative study of seismic behavior of multi story flat slab and conventional reinforced concrete frame structure.

    4. Figure 1.1 and 1.2 were taken from the Google images

Leave a Reply