Use of Tile Dust as Partial Replacemnt for Cement in Concrete

Use of Tile Dust as Partial Replacemnt for Cement in Concrete
Authors : Dr. B. Krishna Rao, Manthena. Sri Lakshmi
Publication Date: 25-12-2013


Author(s):  Dr. B. Krishna Rao, Manthena. Sri Lakshmi

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.2 - Issue 12 (December - 2013)

e-ISSN:   2278-0181


Owing to globalization, privatization and liberalization, the construction of important infrastructure projects are increasing in developing countries like India. Such development activities require large quantities of natural resources. This leads to faster depletion of natural resources on one side and manifold increase in cost of construction of structures on the other side, which is a major problem in construction sector today. In view of this people have started searching for suitable alternate materials which can be used either as an additive or as a partial replacement to conventional ingredients of concrete. Use of tile dust as partial replacement for cement in concrete is one such economical method. In the laboratory tests were conducted by partially replacing cement in concrete by tile dust as 0%, 10%, 20%, 30%, 40% & 50%. The development of compressive strength, split tensile strength and flexural strength of concrete at the age of 7, 28, 56 days are investigated. These strengths are compared with conventional concrete of the same mix proportions.


Number of Citations for this article:  Data not Available


Key Word(s):    


Number of Downloads:     3346

Call for Papers - May - 2017



                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book