DOI : 10.17577/IJERTCONV8IS17012
- Open Access
- Authors : Sivaprasath. K, Anusha. S, Gaurav Kumar. S, Jobish Revanth. S, Nandhini. S
- Paper ID : IJERTCONV8IS17012
- Volume & Issue : ICEECT – 2020 (Volume 8 – Issue 17)
- Published (First Online): 08-12-2020
- ISSN (Online) : 2278-0181
- Publisher Name : IJERT
- License:
This work is licensed under a Creative Commons Attribution 4.0 International License
Temperature Logging System using Can Protocol
Next >
Sivaprasath.K1, Anusha.S2, Gaurav Kumar.S3, Jobish Revanth.S4, Nandhini.S5
1 Assistant Professor, Department of ECE, Sri Shakthi Institute of Engineering & Technology, Coimbatore.
2,3,4,5 Under Graduate Student, Department of ECE, Sri Shakthi Institute of Engineering & Technology, Coimbatore.
Abstract: The main purpose of this project is to monitor temperature using can protocol. A temperature monitoring system will help to avoid heat buildup at your Telecom locations like huts and other network industrial "IT" locations like server rooms and data centers. CAN (controller area network) is a bus system, which was originally developed for automotive application in the early 1980's.CAN is a serial communication protocol that may be used to transfer up to 8 bytes within a single message. The main objective of this project is to monitor and store the temperature value of the device continuously and also in this we can store temperature value of multiple device at the same time. It is an embedded based project which is a combination of hardware and software. Hardware includes connection of temperature sensor, Buzzer and CAN module. Software programming is done using Microsoft visual studio (.net).
1. INTRODUCTION
1.1 TEMPERATURE MEASUREMENT1.2 CAN PROTCOL1.3 PROBLEM STATEMENT1.4 OBJECTIVE1.5 SCOPE1.6 APPLICATIONS2.2 HARDWARE DESCRIPTION2.2.1 TEMPERATURE SENSOR LM35. 2.2.2 OPAMP LM3582.2.3 CAN MODULE MCP25512.2.4 MICROCONTROLLER STM32F02.2.5 CAN MODULE2.3 SOFTWARE DESCRIPTION VISUAL STUDIO (.net)2.4 CAN PROTOCOL3. RESULTS AND DISCUSION3.1 SERVER TEMPERATURE3.2 METHOD STUDY3.3 INSTALLATION OF SETUP FILE3.4 FRONT PANEL3.5 SETUP FILE3.6 DATE AND TIME FORMAT
Next >