IJERT-EMS
IJERT-EMS

Design And Fabrication of Six Speed Constant Mesh Gear Box


Design And Fabrication of Six Speed Constant Mesh Gear Box
Authors : Santhanakrishnan. M, Maniselvam. N
Publication Date: 20-09-2014

Authors

Author(s):  Santhanakrishnan. M, Maniselvam. N

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol. 3 - Issue 9 (September - 2014)

e-ISSN:   2278-0181

Abstract

All the automobile vehicles available are always set to changing speed and torque between engine and driving wheels. Torque is not directly changed but it can be done in the form of power using a suitable device. It is a very useful method that we adopt, and it is also easily affordable. Many other alternative, even though more elegant, and appear to be more effective are not feasible when it comes to transmission. This project mainly focuses on the design and fabrication of a gear box that can transmit torque to the maximum and also helps to do some useful work in automobile where power transmission is a major factor. The transmission of power is done in six speeds in this project. The setup uses two shafts and thirteen gears arranged in suitable distances to achieve the desired torque and speed.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     6782
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book