IJERT-EMS
IJERT-EMS

Modeling And Analysis of An Innova Car Chassis Frame by Varying Cross Section


Modeling And Analysis of An Innova Car Chassis Frame by Varying Cross Section
Authors : N.Shiva Nagaraju, M.V.H. Sathish Kumar, U. Koteswarao
Publication Date: 20-12-2013

Authors

Author(s):  N.Shiva Nagaraju, M.V.H. Sathish Kumar, U. Koteswarao

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.2 - Issue 12 (December - 2013)

e-ISSN:   2278-0181

Abstract

In modern era auto mobile chassis is in important load barring member and it plays an important role of seating an auto mobile body. In present case an analysis is going to be performed on an existing model of an INNOVA 2.5V car chassis model. Initially drawings will be taken for all views by using reverse engineering concepts, then by using those drawing model will be developed by using latest modeling software's like PRO-E , for draw the INNOVA CAR CHASSIS FRAME with Two different cross section namely Rectangular and C-type models, then model will be saved in IGES format, and same will be imported into FEA software like ANSYS, Static analysis can be performed at loads and boundary conditions will be applied as per technical and practical conditions and then results will be reviewed and submitted.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     1614
Similar-Paper

7   Paper(s) Found related to your topic:    

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book