Comparison of Control Algorithms for Shunt Active Filter for Harmonic Mitigation

Comparison of Control Algorithms for Shunt Active Filter for Harmonic Mitigation
Authors : A.Giri Prasad, K.Dheeraj, A.Naveen Kumar
Publication Date: 03-08-2012


Author(s):  A.Giri Prasad, K.Dheeraj, A.Naveen Kumar

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.1 - Issue 5 (July - 2012)

e-ISSN:   2278-0181


Abstract:- Shunt Active Filter generates the reference current, that must be provided by the power filter to compensate harmonic currents demanded by the load. This paper presents different types of SRF methods for real time regeneration of compensating current for harmonic mitigation. The three techniques analyzed are the Synchronous Reference Frame Theory (SRF), SRF theory without synchronizing circuit like phase lock loop (PLL) also called instantaneous current component theory and finally modified SRF theory. The performance of Shunt Active Power Filter in terms of THD (Total Harmonic distortion) of voltage and current is achieved with in the IEEE 519 Standard. The comparison of all methods is based on the theoretical analysis and simulation results obtained with MATLAB/SIMULINK


Number of Citations for this article:  Data not Available


Key Word(s):    


Number of Downloads:     1407

High Impact & Top Rated International Journal

        Call for Papers - April - 2017   



                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book