A Study On Bracing Systems On High Rise Steel Structures

A Study On Bracing Systems On High Rise Steel Structures
Authors : Jagadish J. S, Tejas D. Doshi
Publication Date: 22-07-2013


Author(s):  Jagadish J. S, Tejas D. Doshi

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.2 - Issue 7 (July - 2013)

e-ISSN:   2278-0181


The major concern in the design of multi-storeyed steel building is to have good lateral load resisting system along with gravity load system because it also governs the design. This paper is presented to show the effect of different types of bracing systems in multi storied steel buildings. For this purpose the G+15 stories steel building models is used with same configuration and different bracing systems such as Single-Diagonal, X bracing, Double X bracing, K bracing, V bracing is used. A commercial software package STAAD.Pro V8i is used for the analysis of steel buildings and different parameters are compared. The property of the section is used as per IS 800:2007 which incorporates Limit State Design philosophy.


Number of Citations for this article:  Data not Available


Key Word(s):    


Number of Downloads:     2384

Call for Papers - May - 2017



                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book