IJERT-EMS
IJERT-EMS

To Study The MATLAB Simulation Of A Single Phase STATCOM And Transmission Line


To Study The MATLAB Simulation Of A Single Phase STATCOM And Transmission Line
Authors : Mr. Nileshkumar J. Kumbhar
Publication Date: 19-07-2013

Authors

Author(s):  Mr. Nileshkumar J. Kumbhar

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.2 - Issue 7 (July - 2013)

e-ISSN:   2278-0181

Abstract

Abstract-As an important member of FACTS family, STATCOM (Static Synchronous Compensator) has got more and more widely application. However conventional STATCOM is based on self commutated devices such as GTO, IGBT and MOSFET. This paper reports a development of simulation and laboratory model of single phase voltage source converter based STATCOM as a superior approach to maintain the voltage profile of the AC system and AC transmission line. MATLAB Simulation of STATCOM gives results of power exchange with ac system for different firing angles. This boosts confidence for building the experimental hardware of STATCOM. Sinusoidal Pulse Width Modulation (SPWM) technique is used to trigger the IGBT provides an advantage of simple triggering method and reduced harmonics level. This paper highlights the results obtained from the simulation of STATCOM as well as discussing some of the recommendations for future development.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     2791
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book