Author(s): Mohd. Yunus Khan, Anupriya Saxena
Published in: International Journal of Engineering Research & Technology
License: This work is licensed under a Creative Commons Attribution 4.0 International License.
Volume/Issue: Vol.2 - Issue 7 (July - 2013)
There is tremendous demand for fossil fuels at the same these fuels are depleting at a rapid rate. So, efforts should be made to conserve it. The objective of this experimental investigation was to see the effects on using different design burner heads on the performance of LPG cooking stove. Also, burners of different material were used to study the effects of burner material on LPG stove performance. It was experimentally found out that thermal efficiency of stove using flat and flower face brass burners were higher as compared to regular cast iron burner. There was improvement of 4% when regular brass burner was used instead of regular cast iron burner. Maximum thermal efficiency of 58% was achieved when flat face brass burner head was used. While thermal of 50% was obtained when flower face burner was used.
Number of Citations for this article: Data not Available
7 Paper(s) Found related to your topic:
Publish your Ph.D/Master's Thesis Online