IJERT-EMS
IJERT-EMS

Remote I/O Data Acquisition over PROFIBUS


Remote I/O Data Acquisition over PROFIBUS
Authors : Srinivasa Rao Thamanam, Ch. Praveen Kumar, M.Naresh Kumar, B.Balaji Naik
Publication Date: 02-08-2012

Authors

Author(s):  Srinivasa Rao Thamanam, Ch. Praveen Kumar, M.Naresh Kumar, B.Balaji Naik

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.1 - Issue 5 (July - 2012)

e-ISSN:   2278-0181

Abstract

Abstract -- Intelligent/smart transmitter protocols over Profibus ensure very reliable and self-correcting data communication. They provide control, alarm, trend and other services distributed to its devices. With their deterministic nature, field bus based system architects distribute a process over the network even for applications with hard real-time requirements. PROFIBUS-DP is recognized as a high performance bus network capable of transmitting number of I/O point information in less than a few milliseconds. There is a considerable reduction in time for installation and also the amount of cabling required to setup a Profibus based system in a power plant. Profibus based input module will read signals from the field and send them to the PROFIBUS master. In this project, complete development of PROFIBUS-DP to PROFIBUS-maser communication is proposed and will be tested with test inputs. It is proposed to use M/s Hilscher based PROFIBUS netIC (SOC) hardware solution for realization.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     920
Similar-Paper

High Impact & Top Rated International Journal

        Call for Papers - April - 2017   

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book