IJERT-EMS
IJERT-EMS

Analysis and Effect of Process Parameters on Surface Roughness and Tool Flank Wear in Facing Operation


Analysis and Effect of Process Parameters on Surface Roughness and Tool Flank Wear in Facing Operation
Authors : BADRU DOJA, DR.D.K.SINGH
Publication Date: 01-07-2012

Authors

Author(s):  BADRU DOJA, DR.D.K.SINGH

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.1 - Issue 4 (June- 2012)

e-ISSN:   2278-0181

Abstract

This experimental work presents a technique to determine the better surface quality by controlling the surface roughness and flank wear. In machining operations, achieving desired surface quality features of the machined product is really a challenging job. Because, these quality features are highly correlated and are expected to be influenced directly or indirectly by the direct effect of process parameters or their interactive effects. Thus The four input process parameters such as spindle speed, depth of cut, feed rate, and diameter have been selected to minimize the surface roughness and flank wear simultaneously by using the robust design concept of Taguchi L9(34 method . Taguchi”Ēs optimization analysis indicates that the factors level, its significance to influence the surface roughness and flank wear for the facing operation.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     1466
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book