IJERT-EMS
IJERT-EMS

Performance Investigation of Shunt Active Power Filter Using Hysteresis Current Control Method


Performance Investigation of Shunt Active Power Filter Using Hysteresis Current Control Method
Authors : VIKASH ANAND, Dr. S. K. SRIVASTAVA
Publication Date: 30-06-2012

Authors

Author(s):  VIKASH ANAND, Dr. S. K. SRIVASTAVA

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.1 - Issue 4 (June- 2012)

e-ISSN:   2278-0181

Abstract

The simulation study of PI Controlled, three phase shunt active power filter to improve power quality by compensating harmonics and reactive power required by a non-linear load is presented. The shunt active filter employs a simple method for the reference compensation current based on Fast Fourier Transform. Classic filters may not have satisfactory performance in fast varying conditions. But auto tuned active power filters give better results for harmonics minimization, reactive power compensation and power factor improvement. This paper has proposed an auto tuned shunt active filter, which maintains the THD well within the IEEE-519 standards. The results are found to be quite satisfactory to mitigate harmonic distortion, reactive power compensation and power factor improvement.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     3564
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book