IJERT-EMS
IJERT-EMS

Transient Performance of Cascaded Induction Motors Using UPQC


Transient Performance of Cascaded Induction Motors Using UPQC
Authors : J. Jayashree, B. Balaji, G. Balambiga
Publication Date: 26-09-2017

Authors

Author(s):  J. Jayashree, B. Balaji, G. Balambiga

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 04 , April - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS040718

Abstract

In this paper, the effect of Unified Power Quality Conditioner (UPQC) on transient performance of Common-Shaft Cascade Induction Motors (CSCIM) are performed and commonly used in deep well digging plant (i.e. oil wells). UPQC analyze these events include system starting, supply voltage sag and swells as well as plugging. Maintaining a power distribution bus voltage near sinusoidal at rated magnitude and frequency is known as power quality. The series converter used for protecting a sensitive load from sag, swell and the parallel converter for power factor correction, load balancing and regulation of bus voltage. The hybrid devices consist of two voltage source converters (VSCs) which are linked through a Direct Current (dc) bus. UPQC is implemented using controllers PI controller, for the purpose of Analyzing the Results. The open loop system and the closed loop system are simulated using Simulink and compared. The simulation results show that the UPQC has a great capability in order to enhance the transient performance .

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     2
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book