IJERT-EMS
IJERT-EMS

Optimum Geometry for Two Trapezoidal Corrugated of Surface for the Cylindrical Combustion Chamber


Optimum Geometry for Two Trapezoidal Corrugated of Surface for the Cylindrical Combustion Chamber
Authors : Tahseen Ali Jabbar, Pro. Saleh Ismael Najem, Pro. Sadoun Fahad Dakhil
Publication Date: 14-09-2017

Authors

Author(s):  Tahseen Ali Jabbar, Pro. Saleh Ismael Najem, Pro. Sadoun Fahad Dakhil

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 09 , September - 2017

e-ISSN:   2278-0181

Abstract

The temperature of surface is effect by the radiation heat flux especially in combustion chamber. The radiation heat flux depends the geometry of combustion chamber. Corrugate surface is one of the technical has impression on the radiation heat flux. The effect of trapezoidal dimension (high and width of trapezoidal), which lay out the corrugate surface of cylindrical combustion chamber, on the average radiation heat flux are studied. Objective function, average radiation heat flux, was calculated using neural network technical. Genetic algorithm will be exploitation incur optimum value of design victor. The results demonstrate the optimum value of design vector (high and width of trapezoidal) are 29.944 and 709.36625 mm respectively.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     6
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book