IJERT-EMS
IJERT-EMS

Optimization Design of Injection Mould for External Barrel of Washing Machine Based on Moldflow


Optimization Design of Injection Mould for External Barrel of Washing Machine Based on Moldflow
Authors : Min Zhang, Quan Wang
Publication Date: 11-09-2017

Authors

Author(s):  Min Zhang, Quan Wang

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 08 , August - 2017

e-ISSN:   2278-0181

Abstract

In this paper, external barrel of washing machine of injection process analysis was presented. Mould process of the External barrel was analyzed under two kinds of gates and cooling channels by Moldflow. The paper compares the differences between the two designs, such as air traps, welt line, warping, mould temperature. By Moldflow analysis, the more reasonable mould process conditions and design were obtained, the quality of part can be promoted maximally and molding period is reduced more. The results show that the CAE analysis mould has a strong guiding effect on the injection process.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     2
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book