Stress Analysis on a Turbine Shaft

Stress Analysis on a Turbine Shaft
Authors : Dr. M. Ramakotaiah, M Sudheer Kumar, T Ramesh Babu, T Ravi Teja
Publication Date: 27-08-2017


Author(s):  Dr. M. Ramakotaiah, M Sudheer Kumar, T Ramesh Babu, T Ravi Teja

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 08 , August - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS080197


In engineering practice, the machine parts are subjected to various forces, which may be due to: 1. Energy transmitted 2. Inertia of reciprocating parts 3. Lack of balance of moving parts The different forces acting on a machine parts produce various types of stresses. The shaft is a component, which transmits rotation from one component to other. While transmitting it is subjected to many forces and stresses. The stiffness of constructions is determined by modulus of elasticity of the material, geometrical characteristics of cross sections and linear dimensions of supports. This project is an attempt to analyze the stresses developed to see whether the designed component is within the safe limits. The analysis is performed conventionally and checked with an analysis software ANSYS 8.0


Number of Citations for this article:  Data not Available


Key Word(s):    


Number of Downloads:     9

7   Paper(s) Found related to your topic:    

Call for Papers - May - 2017



                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book