IJERT-EMS
IJERT-EMS

Fly-Ash Pellets as a Replacement of Coarse Aggregate in Concrete Mixture


Fly-Ash Pellets as a Replacement of Coarse Aggregate in Concrete Mixture
Authors : Biswaroop Ghosh, Dr. A. K. Rath
Publication Date: 27-08-2017

Authors

Author(s):  Biswaroop Ghosh, Dr. A. K. Rath

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 08 , August - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS080155

Abstract

In this study, the coarse aggregates are completely replaced by fly ash pellets in fly ash concrete. A mix design was provided for M-25 grade of concrete by IS-10262:2009 method. Ordinary Portland cement of 43 grade and fly-ash and water was mixed with proper proportion to make the flyash pellets. The physical properties of fly ash pellets were studied. The cement and fly ash proportions 10:1, 5:1 were mixed with suitable water having water cement ratio of 0.3 to get the fly ash pellets. The concrete block of cube and cylinder-shaped were casted with fly ash pellets obtained from the above two cement fly ash proportion. Then the compressive strength was tested. This paper briefly presents the compressive strength development of fly ash aggregate concrete at different days of curing along with the cost of the cube casting in laboratory scale

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     27
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book