IJERT-EMS
IJERT-EMS

Optimization of Process Parameters in Machining of Ohns Steel on Vertical Milling Machine using Taguchi Technique


Optimization of Process Parameters in Machining of Ohns Steel on Vertical Milling Machine using Taguchi Technique
Authors : E. Arun Kumar, Dr. C. Bhaskar Reddy
Publication Date: 09-08-2017

Authors

Author(s):  E. Arun Kumar, Dr. C. Bhaskar Reddy

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 08 , August - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS080087

Abstract

Manufacturing technology has been a driving force behind modern economies since the Industrial Revolution. Although manufacturing techniques have become more sophisticated in the improvement of industrial products and processes. The Quality is designed, not manufactured in to the product. The key element for achieving high quality and low cost is parameter design. Through parameter design, levels of process factors are determined, product’s functional characteristics are optimized and the effect of noise is minimized. The objective of the present work is to apply Taguchi method to investigate the effects of milling parameters such as cutting speed, depth of cut and feed rate on surface roughness,MRR.The present work carrying on vertical milling machine and High Speed Steel is selected as cutting tool to machine the OHNS Steel.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     16
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book