IJERT-EMS
IJERT-EMS

Study of Tensile Behaviour by Variation of Kevlar to the Jute Fibre Epoxy Hybrid Composites


Study of Tensile Behaviour by Variation of Kevlar to the Jute Fibre Epoxy Hybrid Composites
Authors : Bhanupratap R, Dr. H C Chittappa
Publication Date: 28-06-2017

Authors

Author(s):  Bhanupratap R, Dr. H C Chittappa

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 06 , June - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS060462

Abstract

Hybrid composites are occupying the place of conventional materials by meeting the requirements of the industries, aerospace, mechanical, space, construction, and biomedical applications. But the desire of achieving the higher modulus to density ratio always remains starved as it requires the maximum output in minimal consumption with better life expectency to find the economical means of utilising the technology for different applications. Here an attempt is made to study, observe and compare to know the tensile behaviour of the hybrid polymer composite material. From the result, increased layer of kevlar to the jute fibre shows improvement in the tensile strength and tensile modulus.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     14
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book