IJERT-EMS
IJERT-EMS

A Paper on Design and Analysis of Pressure Vessel


A Paper on Design and Analysis of Pressure Vessel
Authors : P. Palanivelu, R. Siva Prasad
Publication Date: 28-06-2017

Authors

Author(s):  P. Palanivelu, R. Siva Prasad

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 06 , June - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS060424

Abstract

Objective: This Paper investigates to determine the stress distribution and failure location for a given pressure vessel using Finite Element Analysis (FEA). Comparing the FEA results with analytical results shows that the FEA software predicted the failure location very well for the symmetric shaped pressure vessel. By modifying the design and keeping the same material of the given pressure vessel, we could reduce the induced stress in the pressure vessel or we can increase the working pressure. The results are to be compared on the basis of Maximum distortion energy theory also known as Von Mises-Hencky theory i.e. Von Mises yield criterion. And the deviation between the analytical results and the software result, around the critical location to be checked for the stress discontinuity. Since it is an axis-symmetric pressure vessel, it is allowed to be modelled as a 2D axis-symmetric model and analysis is done.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     11
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book