IJERT-EMS
IJERT-EMS

Design and FEA of Go Kart Chassis


Design and FEA of Go Kart Chassis
Authors : Bhosale Nagesh Baburao, Deshmukh Mahesh Bhaskar, Darandale Gaurav Narayan, Fadale Jignesh Laxman
Publication Date: 27-06-2017

Authors

Author(s):  Bhosale Nagesh Baburao, Deshmukh Mahesh Bhaskar, Darandale Gaurav Narayan, Fadale Jignesh Laxman

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 06 , June - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS060402

Abstract

Chassis is basis foundation of any Automobile locomotive. Go-Kart is primary form of racing car where engineers can make use of theoretical knowledge with practical existence. There are various kinds of chassis out of which Tubular frame chassis are suitable for small vehicle. Design of chassis is on the basis of rigidity, strength and safety of driver by considering car that is durable as well as reliable whose material easily available in India. The kart has been designed using sound design principles .Go-kart is small four wheeler vehicle without suspension light powered vehicle used for racing. Basically CREO, CATIA, AUTO-CAD software are used for designing of Chassis whereas ANSYS- BENCHWORK software is used for Analysis of Chassis. Chassis is made up of joining various small links by using welding with limited number of joints so to avoid increase of weight and make the chassis strong enough to withstand high load.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     13
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book