IJERT-EMS
IJERT-EMS

Real Time Implementation of PI Controller for Triple-Lift Luo Converter


Real Time Implementation of PI Controller for Triple-Lift Luo Converter
Authors : N. Dhanasekar, R. Kayalvizhi
Publication Date: 20-03-2017

Authors

Author(s):  N. Dhanasekar, R. Kayalvizhi

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 03 , March - 2017

e-ISSN:   2278-0181

Abstract

Positive output Luo converters are a series of new DCDC step-up (boost) converters, which were developed from prototypes using voltage lift technique. These converters perform positive to positive DC-DC voltage increasing conversion with high power density, high efficiency and cheap topology in simple structure. They are different from other existing DC-DC step-up converters with a high output voltage and small ripples. Triple lift LUO circuit is derived from positive output elementary Luo converter by adding the lift circuit three times. Due to the time varying and switching nature of the Luo converters, their dynamic behavior becomes highly non-linear. Hence in this research work, design and hardware implementation of PI controller have been carried out using TMS320C242 DSP for the Triple-lift Luo converter .The experimental results are presented and analyzed under line and load disturbances.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     14
Similar-Paper

High Impact & Top Rated International Journal

        Call for Papers - April - 2017   

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book