IJERT-EMS
IJERT-EMS

Modelling and Analysis of Drilling Jig for Mounting Casing of Electric Motor


Modelling and Analysis of Drilling Jig for Mounting Casing of Electric Motor
Authors : Geet Prasanna Pandit, Sagar Bhausaheb Patil, Rushikesh Vasantrao Shinde, Shubham Baburao Amale
Publication Date: 01-03-2017

Authors

Author(s):  Geet Prasanna Pandit, Sagar Bhausaheb Patil, Rushikesh Vasantrao Shinde, Shubham Baburao Amale

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 01 , February - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS020373

Abstract

In today’s fast growing industrial sector jig plays very important role by time saving to achieve quality work pieces. Use of drilling jig increases the production rate with good quality and accuracy. The main objective of using jigs and fixtures in an industry is to achieve the Interchangeable Part Concept, and these are mainly used where production of goods is on large scale. The scope of this paper is to study the performance parameter by modelling an assembly of Drill Jig in advanced modelling software like CATIAV5R20 and analysis was done by using the predominant analysis software ANSYS 14.5. For the study, this Drill Jig is designed for the ‘Mounting casing of Electric Motor’. It involves the modelling of individual part, assembly of the drill jig and analysis is carried out on clamping system to determine the stress and deformation.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     24
Similar-Paper

High Impact & Top Rated International Journal

        Call for Papers - April - 2017   

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book