IJERT-EMS
IJERT-EMS

Synthesis of Fe Doped Zno Spintronic Nano Powders by Solution Combustion Method & There Characterization


Synthesis of Fe Doped Zno Spintronic Nano Powders by Solution Combustion Method & There Characterization
Authors : Hansaraj N. Sahu , Baburao N. Sherikar
Publication Date: 28-02-2017

Authors

Author(s):  Hansaraj N. Sahu , Baburao N. Sherikar

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 01 , February - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS020364

Abstract

In this work Fe doped ZnO powders were prepared by solution Combustion method using Zinc nitrate and ferric nitrate as oxidizer and urea as fuel at 500Ó©C. The synthesized powders were characterized by XRD for phase analysis, SEM for microstructure and EDS for elemental analysis. The obtained XRD patterns of synthesized powder were identical with the standard peaks of ZnO (JCPDS card number 36-1451). SEM images taken at 25kX, 50kX shows that crystalline powder with the formation of SEM image show the formation of agglomerate of size 300-400nm formed by nano powder of ZnO of 18-30mm and crystallite size of the powder ranges between 18-27nm, when calculated using Scherer formula.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     54
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book