IJERT-EMS
IJERT-EMS

Analysis of Fault Ride through Capabilities in Wind Plants using STATCOM and UPFC-A Case Study


Analysis of Fault Ride through Capabilities in Wind Plants using STATCOM and UPFC-A Case Study
Authors : Kiran Karibasappa Sunagar, B. D Ballullya, Sandeep Kudal, Vrutha Puthran
Publication Date: 08-10-2016

Authors

Author(s):  Kiran Karibasappa Sunagar, B. D Ballullya, Sandeep Kudal, Vrutha Puthran

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 5 - Issue. 10 , October - 2016

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV5IS100097

Abstract

Voltage dip is one of the major concerns related to quality of power in power system. The main objective of this paper is to analyze the stability issues related to wind plant connected to grid. The work flow goes in order by collection of real time data, study of existing methods employed to improve power quality enhancement of wind plant connected to grid. The wind plant connected to grid and the use of FACTS controller such as STATCOM and UPFC controller with consideration of their design and control levels, a grid interactive wind plant model is built using MATLAB/SIMULINK model. The developed SIMULINK model is studied for steady state analysis of reactive power compensation and voltage variation in wind plant. The system is analyzed with and without STATCOM and UPFC controller for different condition to study voltage variation and reactive power support.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     48
Similar-Paper

High Impact & Top Rated International Journal

        Call for Papers - April - 2017   

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book