Microcontroller Based Dc Motor Control

Microcontroller Based Dc Motor Control
Authors : Jayshree sahu,S.K.Sahu,Jayendra kumar
Publication Date: 30-05-2012


Author(s):  Jayshree sahu,S.K.Sahu,Jayendra kumar

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.1 - Issue 3 ( May- 2012)

e-ISSN:   2278-0181


DC motor control means direction and speed control of a DC motor. Dc motors are widely used in speed and direction control because control of these motors are easier than other motors. The motion of a DC motor is controlled using a DC drive. DC drive changes the speed and direction of motion of the motor. Some of the DC drives are just a rectifier with a series resistor that converts standard AC supply into DC and gives it to the motor through a switch and a series resistor to change the speed and direction of rotation of the motor. But many of the DC drives have an inbuilt microcontroller that provides programmable facilities, message display on LCD, precise control and also protection for motors


Number of Citations for this article:  Data not Available


Key Word(s):    


Number of Downloads:     13408

Call for Papers - May - 2017



                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book