IJERT-EMS
IJERT-EMS

Power Flow Analysis on IEEE 57 bus System using MATLAB


Power Flow Analysis on IEEE 57 bus System using MATLAB
Authors : Satyajit Bhuyan, Sanjib Hazarika, Aroop Bardalai
Publication Date: 30-08-2014

Authors

Author(s):  Satyajit Bhuyan, Sanjib Hazarika, Aroop Bardalai

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol. 3 - Issue 8 (August - 2014)

e-ISSN:   2278-0181

Abstract

For proper planning and operation of power system, economic scheduling of generating units and to achieve power through tie line as per agreement, power flow analysis is a must. It is performed to have clear knowledge regarding bus voltage magnitude and angle and line flows. A number of methods are being used all over the world for power flow analysis. Newton Raphson method, Gauss Seidal method, fast decoupled load flow methods are a few to name. Now days, various soft computing techniques are adopted by researchers as well as practising engineers for load flow analysis to cater various needs of the research institutes and the utilities. Every method has got advantages as well as disadvantages. The objective of this paper is to develop an user friendly software to perform load flow analysis for IEEE 57 bus system. The software will be helpful for researchers, practising engineers, students of power system of various levels to carry out power flow quickly and efficiently as per their requirement. The software is developed using MATLAB programming.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     3386
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book